Hearle for Congress Do It Yourself Campaign Sign Instructions

WINDOW SIGN




LAWN SIGN

1. Print the pdf file (for best results use photo paper and ink in a photo quality printer) onto 8-1/2" x 11" paper.
2. Cut a piece of cardboard into an 8-1/2" x 11" rectangle.
3. Tape or glue the printed page to the cardboard piece. Make sure the printed side of the sign is facing out.
4. Untwist a wire coat hanger, and bend it into a "U" shape with the two ends roughly equal in length from the middle bend.
5. Using duct tape, tape the coat hanger "U" to the back side of the cardboard. Make sure the wire ends are facing down from the bottom of the printed sign.
6. Stick the two ends into the ground (be mindful of where your sprinklers are set).

T-SHIRT

1. Buy a T-Shirt and a T-Shirt transfer.
2. Set your printer to print the campaign sign backwards onto the transfer.
3. Follow instructions on the transfer package to transfer the image to the T-Shirt.

Campaign Sign Etiquette: Please feel free to forward this to your friends and acquaintances and to encourage them to forward it. Please do not place campaign signs on public property or on someone else's private property without their explicit permission. And most definitely, please do not litter.

Thank you for your support
—Kevin Hearle